Back to List

Bare Die Data Sheet: 74HC04 REV 2

The 74HC04 contains x6 independent inverters with standard push-pull outputs performing Boolean function Y = Ā in positive logic. Internal circuitry comprises of three stages and includes buffered output for high noise immunity and stability.
A direct replacement for industry standard 74HC04 made by Texas Instruments (TI) National (NSC) Motorola (MOT) ON Semi (ON) and Fairchild (FCH).
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Output Drive Capability: 10 LSTTL Loads
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Low Input Current: 1µA
  • Operating Voltage Range: 2.0 to 6.0V
  • Direct drop-in replacement for obsolete components in long term programs
  • Function compatible with 74LS04
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.755mm² (2720.258mil²)
X: 1300µm (51mil)
Y: 1350µm (53mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • Bits: 6
  • 3-State O/P: No
  • Schmitt Trigger: No
Specification:
VCC (Min): 2.00V
VCC (Max): 6.00V
fMIN @ VNOM: 28MHz
tpd (Max) @ VNOM: 16.0ns
ICC (Max) @ VNOM: 0.0200mA
VNOM (Max): 5.5V
Output Drive (Max): 5.2mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.